Mi Air Purifier 2S (White)

  • 9
  • Zotezo Score
0
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: Mi Air Purifier 2S (White) - Rs. 8,888
Check all prices
  • All prices mentioned above are in Indian Rupee.
  • This product is available at Amazon, Flipkart, Tatacliq.
  • At amazon.in you can purchase Mi Air Purifier 2S (White) for only Rs. 8,888, which is 1% less than the cost in Tatacliq (Rs. 8,998).
  • The lowest price of Xiaomi Mi 2S 29W Air Purifier (White) was obtained on September 16, 2019 7:00 pm.
Mi Air Purifier 2S (White)
Mi Air Purifier 2S (White)

12,999.00 8,888.00

Description

Keep the air surrounding you clean and free from impurities and allergen. Equipped with an OLED Display which automatically adjusts its brightness and a High-precision Laser Sensor that can detect the smallest of impurities, this Mi air purifier is just what you might be looking for.

New OLED Display

This Mi air purifier features an OLED Display which allows you to keep a track of how clean the air is in your room by displaying the PM2.5 level, temperature and humidity level.

Automatic Brightness Adjustment

To ensure that your sleep is not disturbed at night, this Mi air purifier’s OLED display automatically adjusts its brightness levels according to ambient light.

High-precision Laser Sensor

This Mi air purifier features a High-precision Laser Sensor that can detect particles as small as 0.3 micrometers. Once detected, this is instantly displayed on the OLED screen.

Powerful Air Delivery Rate

With a Clean Air Delivery Rate (CADR) of up to 310m³/h, this Mi air purifier is quite fast and powerful in purifying a room effectively, thanks to its air pressurization design.

3-layer Filtration for Maximum Purification

This Mi air purifier comprises a 3-layer Filtration System. The outer layer is responsible for removing large airborne particles, such as dust and hair. The middle layer of the air purifier is responsible for removing micron-sized particles and harmful bacteria. This layer uses an H11-grade filtration technology from Japan. The innermost layer, which is made from high-quality activated carbon, is responsible for removing formaldehyde, odor and other harmful substances.

Tower Structure Design

Featuring a classic Tower Structure Design, this Mi air purifier is compact in size yet efficient in performance. It has 943 intake holes which help in increasing the air intake space.

Smart Control with the Mi Home App

You can check the air quality, temperature, humidity and control the functioning of this Mi air purifier using your smartphone. All you have to do is download and install the Mi Home App on to your smartphone. This app will also notify you when its time to replace your filter.

Silent and Energy Efficient

The Mi air purifier renders a Silent and Energy-efficient operation.

Product Features & Benefits : 

  • OLED display; Laser particle sensor
  • Allergen and Odour free
  • 310m³ PM/hr CADR | Remote app control
  • 360 degree air intake with 3-layer filtration
  • 3 different modes to choose from (Auto, Night and Manual)
  • OLED display (shows real-time PM2.5 concentration, temperature and humidity, Wi-Fi connection and working mode)
  • Quiet and energy efficient
  • Power: 29 watts; Operating Voltage: 100 – 240 volts
  • Includes: Air Purifier, Filter, User Guide, Power Cable
  • Coverage Area : 400 sq ft
  • Suitable For : House, Office
  • Indicators : Air Quality Indicator, Humidity Indicator, Filter Replacement Indicator, Temperature Indicator, Mode Indicator, Wi-Fi Connection Indicator

Power Consumption : 

  • Power Requirement : AC 100 – 240 V
  • Power Consumption  : 29 W

Product Dimensions : 

  • Width : 24 cm
  • Height : 52 cm
  • Depth : 24 cm
  • Weight : 4.5 kg

Warranty : 1 year warranty provided by the manufacturer from date of purchase

9Zotezo Score
Excellent
Effectiveness
9
Design
8
Price
8
Value for Money
8.5
PROS
  • It has an OLED display
  • Laser particle sensor
  • Allergen and odour free
  • 360 degree air intake with 3-layer filtration
  • 3 different modes to choose from (Auto, Night and Manual)
  • OLED display (shows real-time PM2.5 concentration, temperature and humidity, Wi-Fi connection and working mode)
  • Quiet and energy efficient
CONS
  • Burns a hole in the pocket

Mi Air Purifier 2S (White) Prices

Price History

Price history for Mi Air Purifier 2S (White)
Latest updates:
  • Rs. 8,888 - September 15, 2019
  • Rs. 8,999 - September 14, 2019
  • Rs. 8,888 - September 14, 2019
  • Rs. 8,999 - September 10, 2019
  • Rs. 8,989 - September 5, 2019
  • Rs. 8,599 - September 3, 2019
  • Rs. 8,777 - September 1, 2019
  • Rs. 8,989 - August 31, 2019
Since: June 28, 2019
  • Highest Price: Rs. 8,999 - June 28, 2019
  • Lowest Price: Rs. 8,555 - August 27, 2019

Videos

Videos: Mi Air Purifier 2S (White)

Reviews (5)

5 reviews for Mi Air Purifier 2S (White)

2.8 out of 5
1
1
1
0
2
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Nirmal

    Filter remaining shows as 99% in couple of mins of first usage my pm level it was showing < 10 it's now showing 98% within just 4hrs usage. Pollution levels are way less than 30

    Helpful(0) Unhelpful(0)You have already voted this
  2. TKJ

    Overall it looks good, easy to install and operate with scheduled or auto mode , good build quality etc but Price is on the upper side i think, 5-6K ideally.Now the review – So I got it 3 weeks back and hardly used for 4-5 days. for the first two days i was excited with the features and display etc but later i found it of not much useful in Bangalore climate. the AQI reading is mostly between 20-45. it jumps from 20 to 40 in no time and vice versa in a partially closed room environment, not sure it should behave this way or an issue with the sensor. the low AQI indicates good air quality so I am not worried much about turning it on everyday. one day it worked as expected when some kitchen smoke filled the room it shown red indicator and fan speed increased. I have experienced a sore throat after switching it on for full night for two days near my bed.Overall its useful for people stay in foggy area with worst air quality, current Bangalore climate doesn’t warrant one, the upcoming winter might need though.

    Helpful(0) Unhelpful(0)You have already voted this
  3. TM

    I was initially skeptical about this purifier – but so far it hasn’t disappointed. Design is sleek and modern. Showed a PM2.5 of more than 300 (in Delhi house) and got it down to

    Helpful(0) Unhelpful(0)You have already voted this
  4. HC Del

    The product seems to work well but look at both the Amazon and the MI.com website and the replacement filter is constantly out of stock- what’s the point if one can’t get the air filter easily

    Helpful(0) Unhelpful(0)You have already voted this
  5. Sunil

    Bought the Mi 2S Air purifier on the Diwali sale with 10% Amazon Cash back and 10% HDFC rebate. So overall at that price it was a steal. 3 of us in office bought the purifier in the deal. Since then 2 more colleagues are waiting for a similar deal to buy it after discussing it’s effectiveness.The purifier was delivered on 9th but never got to use it till yesterday as first I was out of station and when we returned it had rained in Delhi NCR and the PM2.5 indicator was showing a reading of less than 100 in Indirapuram. However yesterday I felt the need to use it and when I switched it on it gave me a PM 2.5 reading of 220. So for the first time yesterday since it was delivered decided to use it overnight. Below are my observations.1. Easy to install and operate from the device2. Download of software from the Google Play store was easy and also the app is pretty explanatory3. Had to try 4 to 5 times to setup the device on my smart phone but was not successful so finally had to reset the Mi 2S Purifier and after that in the 1st try was able to set it up.4. Make sure during the setup that the Purifier is close to the Smart Phone and also the router but once the setup is done there is no such requirement. (At least I had to place the Purifier close to the router and smart phone)5. You can completely control the device from your smart phone.6. I am yet to setup using Alexa which I would probably try this or the next weekend and will update.7. As some has complained that the PM 2.5 readings fluctuate a lot. For me also at times it fluctuates and I believe that since it has laser sensors it is bound to happen as when for some reason it does not detect any particle it drops the reading. Probably Mi can have a software update to make it more stable.8. After the setup on the smart phone the firmware on the Purifier got updated. Not sure what improvements were done as I had not used it with the previous firmware.9. There are 3 modes. a) Manual Mode – Very noisy, b) Auto Mode – which I used. This was initially noisy like Manual as the PM 2.5 reading was high (220) but then automatically the fan speed reduced as the PM 2.5 reading came down to 100. c) Sleep Mode – You can hardly hear the fan running but then if the PM 2.5 reading is high this would not be effective9. After usage for the whole night i.e bringing the PM 2.5 from 220 to approx between 50 and 70 the filter shows 99% remaining. The unit was run from 9:30 PM to 7:00 AM next morning non stop in auto mode.I had not had a sound sleep fro the past 5 to 6 days nor did my baby who is 4 month old as she would wake up midnight but today both of us did not wake up till 6:45 AM and I could feel the difference in quality of the air. Seeing it’s usage I believe that the filters would easily last two season as I believe I would not be using it beyond JanuaryWill keep the post updated and do let me know if anyone needs any clarification as I would more than happy to clear your doubts.+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Update : 24th Nov 2018Have been using it for almost 5 days now.The night of 19th and 20th Nov were really bad. The PM2.5 reading was hovering around 220 to 240 in Indirapuram inside the house. The device took around 30 to 40 minutes in Auto mode to bring the level down to between 50 and 70. Just to make sure that the whole rooms air was being cleaned and not just the air around the air purifier I switched on both the ceiling fan in the room at a speed of 3 (as the room size is (approx. 13*16) so that the air starts circulating. The PM2.5 jumped by around 10 to 15 units and I was ok with that and this proved that the air in the whole room was being cleaned. Also by the end of two nights the filter showed 99% remaining.On the remaining 3 nights the PM2.5 reading was around 150 to 170. It would bring down the PM2.5 to about 50 in less than 30 minutes. So today morning the filter remaining shows is 98%. Also I compare the humidity and temp it displays with my own temp and humidity sensor. The Temp was of by 1 deg and the humidity level by 4%. So more or less the Temp and Humidity readings are accurate. As for PM2.5 I do not have anything to compare it to.Overall extremely satisfied with the product and I repent why I did not but one earlier. It is a must have thing in Delhi NCR for sure+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Update: 19th Dec 2018Well time for an update as it has been a month since I have been using it.1. Used it yesterday night after a gap of 3 to 4 days as it had drizzled in Delhi NCR approx. 4 to 5 days back.2. The PPM shown was 300+ and within a 20 minutes the PPM was down to 60.3. Took the filter out and could see dust settled on the filter. I tried taking pictures but in photo it is hard to see the dust settled on the filter. So not posting it. However I am posting yesterday’s app screen shot showing the readings and the time it took to bring down the PPM in permissible limits.4. Over a span of month I have probably used the purifier approx 22 to 25 days with it running for approx. 9 hours in the night5. Mostly the PPM being recorded in Indirapuram was between 200 and 300 however in couple of days it was close to 350+ and in one day it was above 400.6. The filter remaining that it shows is 94%. With this rate I guess it would easily last 3 years.7. I had to reset my phone and then again had to setup the purifier on my smart phone. It is true that during the setup the phone, the purifier and the router should all be close to each other but you are good once the setup is done. This is one reason I did not try setting it up with Alexa as I will have to unhook my Fire Cube to take it close to the router and also carrying the purifier is not easy.8. I have been using the purifier in auto mode since the day I bought it. Haven’t used it in any other mode.9. I just wish that it had some easy way to carry it inside the house.+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Update: 3rd Jan 2019Well I was not planning to update the thread so quickly however I wanted to give an update which I believe would be useful while making the decision.I was out of city and was in my hometown(Chandigarh) since 21st Dec 2018 and there is hardly any pollution there. I just came back yesterday i.e. 2nd and was surprised to see the pollution in Delhi when entering the Karnal Bypass. So yesterday night switched on the purifier and the reading which it displayed was around 280 (Indirapuram). As expected within 30 minutes the reading was down to 70 and this was around 10 PM. However at around 1:30 AM I woke up due to the high noise as the reading was close to 120 and since I use auto mode automatically the fan speed increased. Due to the high fan speed I was unable to sleep as inspite of high fan speed the PM 2.5 reading was not coming below 90 as that is when the fan speed reduces as the indicator light also turns to orange. Not sure when I slept but again at around 5:00 AM I happen to awake again due to high noise because of high fan speed as reading was again hovering around 120 PPM. So almost whole night I had a disturbed sleep because of high fan speed in auto mode because of high pollution levels i.e. above 100.Today will try to seal all the doors by placing a wet towel in the door gaps and see how the purifier performs. Came to know from my friends that in Delhi for the past 10 days the purifier shows a reading of 600 when it starts and at night also as was the case with me for them also the reading is not going below 100 and as such facing issue of high fan speed.Reducing to 4* from 5* because of high fan speed noise.Updated just this line on 21 Jan 19 – Reverting the rating back to 5* as fan speed is what it is supposed to do in high pollution level. It was my problem that I did not have the room sealed.+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Update- 6th Jan.Probably my last update for this pollution season as it had rained in Delhi NCR today morning and now won’t be using it for a week or so and by then the temp. would also rise and the pollution level would also decrease.So for the past 3 to 4 days I have been placing a towel at the lower end of the door which faces the balcony to prevent the outside air from coming in and due to this the pollution level inside the room would stay reduced and as such the fan speed would not increase on auto mode. So if the pollution level increase make it a point to somehow seal the rooms to prevent the outside air from coming in and one way of doing it is to place a wet cloth at the bottom of the doors and the pollution levels would stay contained once the purifier reduces them to a permissible limit.The filter shows remaining as 92% after using it for almost 30 days with 8 to 9 hours per night.That’s it from me. Will be on the lookout for the comments section to clarify any doubts that anyone has.Well I was not anticipating that the pollution level would rise so much. Used it yesterday i.e. the 10th Night and the PM2.5 reading was 380 Indoors. So guess a long time to go before I can pack it for this season 🙂

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Zotezo.com
    Logo
    Welcome Zotezo.com
    India's Wellness Destination!
    Continue With
    Reset Password